Anlai Industrial Equipment Technology Co.,Ltd
Anlai Industrial Equipment Technology Co.,Ltd
Add to Cart
The fast rolling shutter door air shower can be produced with the maximum dimension of 6m in width and 14m in height. The opening and closing speed of the door ranges from 0.6 to 2.0m/s. The speed can be set when the product is installed. From the bottom to the top, the product only needs about 2 seconds. It is 20 times faster than the electric rolling gate. The elastic PVC base fabric gas seal is installed at the bottom of the product. It can link with various uneven grounds tightly. The gas seal is filled with cushioning material for enhancing the durability. The unique double-layer brush is adopted by the door post for better tightness.
Model | AL-GS-1800 | AL-GS-2000 | AL-GS-2300 | Cargo Shower Tunnel | |
External Dimension (W×D×H)mm | 1800×1500×2180 | 2300×1500×2180 | 2300×2000×2180 | 1800×4000×2180 | |
Internal Work Zone (W×D×H)mm | 1300×1420×1980 | 1500×1420×1980 | 180×1920×1980 | 1300×3860×1980 | |
Noise Level(dB) | <62 | <62 | <62 | <62 | |
Stainless Steel Nozzle | 18PCS | 18PCS | 32PCS | 96PCS | |
Wind Speed | ≥25m/s | ≥25m/s | ≥25m/s | ≥25m/s | |
Prefilter | Size | 775×380×17 | 775×380×17 | 775×380×17 | 775×380×17 |
Efficiency | G4 | G4 | G4 | G4 | |
HEPA Filter | Size | 610×610×120 | 610×610×120 | 610×610×120 | 610×610×120 |
Efficiency | 99.99%@0.3µm | 99.99%@0.3µm | 99.99%@0.3µm | 99.99%@0.3µm | |
Fluorescent Lamp | 30W×1 | 30W×1 | 30W×1 | 40W×2 | |
Power Supply | 380V/50Hz | 380V/50Hz | 380V/50Hz | 380V/50Hz | |
Straight Thru Air Showers
The entry door and exit door are straight across from one another. This is the most common type of air shower.
90-Degree Air Showers
The air shower can be provided with the doors in a 90-degree configuration for those applications where a Straight Thru path will not work.
3-Door Air ShowersThis air shower has three doors. The typical configuration is one
entrance door and two doors exiting to two different cleanrooms.
Tunnel Air Showers
Two or more air showers can be combined to form a longer unit. By adding complete sections, an efficient arrangement for the nozzles will be maintained. These tunnels can be used for "large batch" cleaning – if a large number of people will enter and exit as a group – or for "continuous flow" cleaning – where the showering time is determined by how long it takes to walk the length of the tunnel. Both 90-degree and straight-through air showers can be combined to form the tunnel configuration. NOTE: The cost for additional sections is lower than the basic unit, because the cost of the doors and electrical control is covered by the first unit – and additional units don’t need those items.
Low Profile Air Showers
The AL-AS-1300LP (low-profile) model has an overall assembled height of 95 inches. The unit has the blower assembly, HEPA filter, and electrical components mounted on the side to permit the lower height. It can be assembled in a space 96 inches high, making it ideal for retrofits or areas where penetrating the ceiling is undesirable. The unit is shipped disassembled to the point that all parts will fit through a standard doorway. Service access to the blower assembly, filters, and electrical components is through two doors on each end of the unit. This is standard. Note: When installing the Low Profile unit, it must stick through the wall so that the end access doors are available to service the blower and filters.
Cart/Part Air Showers
Parts-cleaning air showers are available in a variety of sizes, shapes and configurations. They are available to be used with carts, conveyors, pallets and continuous-part operations. This style of air shower can use swing doors, vertical-sliding, horizontal sliding, or no doors at all. Please consult the factory with details of your specific application.
WallMount PassThru Air Showers
These are similar to the Cart/Part Air Showers, but they are smaller and mount off the floor.