
Add to Cart
Cleanroom Fan filter unit
Introduction:
Cleanroom fan filter unit is designed to provide filtered laminar air flow over a specific area, the unit integrates a high efficiency fan together with a HEPA/ULPA air Filters. the fan filter unit in contaminated air from the top of the module and exhausts filtered clean air vertically in a unidirectional air stream at its base.
Applications:Cleanroom fan filter unit Conventional use for clean room construction,softwall cleanroom or hardwall cleanroom ceiling.
Operating Features:
1: This cleanroom fan filter unit light weight, corrosion-resistance construction is completely smooth and clean room–compatible.
2: The Proprietary construction technology creates better air flow uniformity across the entire filter face for superior laminar flow band protection.
3:Standard EBM blower speed controller allows for easy adjusting of the Fan filter unit speed controller. equipped with overheating protection inside.
4:Cleanroom Fan filter unit is operates at low noise and power consumption levels
Technical Parameter:
MODEL | AL-FFU615 | AL-FFU920 | AL-FFU1175 | AL-FFU1225 | |
External size (mm) (WXDXH) | 615X615X350 | 920x615x350 | 1175x575x350 | 1225X615X350 | |
Material | Steel plate with painting/galvanized steel/aluminum/stainless steel | ||||
Air flow(m3/h) | 600 | 800 | 1000 | 1200 | |
Air velocity (m/s) | 0.3/0.35/0.4/0.45/0.5 | ||||
Pressure(pa) | 97(10mmAq) | ||||
Control system | 1: Power on/off 2: Control air speed up/down | ||||
HEPA FILTER | Size(mm) | 610X610X69 | 915X610X69 | 1170x570x69 | 1220x610x69 |
Efficiency(%) | 99.995% @ 0.3um | ||||
Pressure (pa) | <220pa @ 0.45m/s | ||||
Power supply | 220V/110V ,50/60HZ | ||||
Power (w) | 115w | 115w | 123w | 172w | |
Noise (Db) | 57 | 57 | 57 | 57 |
Customer’s design is available for the Cleanroom fan filter unit.